-
Before applying your Sticker,
clean surface for application, and dry thoroughly. Do not
apply to surface under 60 degrees F.
-
Turn sticker backing side up
(fig. 1).
-
Rub this surface firmly with
vinyl application squeegee (purchase below), or something similar.
-
Carefully REMOVE BACKING
PAPER FROM STICKER (fig. 2). DO NOT REMOVE STICKER FROM
BACKING PAPER!!
-
Holding sticker adhesive
(sticky) side away from you (fig. 3), apply sticker to surface (fig.
4).
-
Rub firmly with vinyl
application squeegee (purchase below), or something similar.
Make sure to remove all bubbles from vinyl. You may apply
water with a very small amount (2 or 3 drops) of dish soap mixed in
it to aid in bubble removal, and to allow you to move the sticker if
desired.
-
Allow sticker to dry thoroughly
(if you used any liquid to apply), and remove application tape.
-
Your Grafx Solutionz Sticker is
now ready for SHOWING OFF.
-
FINALLY!! If you
have any questions, call us at (815) 970-2980 (8:00am - 6:00pm
central time) or email us at: INFO@GRAFX SOLUTIONZ
